TELL US ALL ABOUT ITSEND PHOTOS · GET A QUOTE

Nationwide demolition-site scrap + asset recovery

Surplus Buyers& Demo

We can clear the site — and help you recover its full value.

Across the United States, we partner with demolition contractors and industrial owners to clear sites efficiently—buying valuable surplus machinery, vehicles and equipment while recovering high-value alloys and recyclable metals. Rapid mobilization and coordinated removal keep valuable assets moving and demolition schedules on track.

Toll-free: 1 (877) 722-6048

Industrial plant interior with process machinery, piping and steel platforms
Built for industrial scaleNationwide project response
Nationwide service Rapid mobilization Machinery + vehicles Electrical equipment Pumps + valves Industrial alloys
01 / WHAT WE BUY

Value hiding in plain sight

Flatbed truck loaded with large reels of recovered industrial cable
Industrial cable reelsRecovered cable and conductor from commercial and industrial sites.

Examples of assets we buy from demolition and decommissioning sites.

1 / 13
04

Pumps, valves & controls →

Process pumps, control valves, actuators, meters and industrial instrumentation removed during decommissioning.

06

Copper, brass & cable →

Copper wire, busway, industrial cable, brass valves, fittings and accumulated nonferrous material.

08

Industrial alloys →

Nickel-bearing, heat-resistant and other specialty alloys found in industrial systems and equipment.

09

Complete surplus lots →

Mixed inventories of machinery, electrical gear, maintenance stock and recoverable metal from closures or site cleanouts.

DIRECT PARTNERSHIP VALUE

Better metal prices—not just faster clearing.

Local scrap yards typically buy material delivered over the scale at the gate. By partnering directly with demolition contractors and evaluating the recoverable metals as part of the project, we can put more value back into the job—and often beat local scrap-yard pricing.

Have something like this? Tell us what you have

Get a Quote

On site. Hands on.

Recovery starts before the first cut.

Bring us in early anywhere in the United States. We help identify what should be sold, reused or recycled, establish purchase value and coordinate removal around the demolition schedule—so valuable assets move out instead of slowing the job down or entering the waste stream.

  • One recovery partner for machinery, vehicles, electrical gear and high-value metals
  • Early asset review before demolition or decommissioning begins
  • Fast logistics with our trucks and trailers, plus rigging coordinated for the equipment and site
  • Rapid removal on tight schedules to keep demolition sequencing on timeline
02 / FORKLIFTS, FLEET VEHICLES & EQUIPMENT

Idle equipment still has value

When operations wind down — a plant closure, a warehouse consolidation, or a facility boarded up and left idle — the forklifts and equipment left behind still hold recoverable value. Surplus Buyers & Demo purchases out-of-service, decommissioned and no-longer-used forklifts and industrial equipment directly from owners, facility managers and demolition contractors. We evaluate equipment where it sits, agree on a fair purchase price, and manage removal on your schedule.

01

Forklifts of every class

Electric, LP-gas, diesel and rough-terrain forklifts of any age or condition — running or not, including units that have sat out of service for years.

02

Material-handling equipment

Scissor lifts, boom lifts, telehandlers, pallet jacks, sweepers and warehouse racking left behind at closed or consolidated facilities.

03

Shop & support equipment

Air compressors, generators, welders, machine tools and maintenance equipment remaining on site after shutdown.

04

Single units or full fleets

One retired truck or an entire equipment yard — we scale the purchase, the crew and the pickup to fit what is on the ground.

05

Purchased as-is, where it sits

No repairs, cleanup or preparation required from the seller. Equipment is evaluated in place and purchased in its current condition.

06

Loading & hauling handled

We coordinate rigging, loading and nationwide transport, and leave the area clear for the next phase of work.

We buy decommissioned fleet vehicles

Retiring vehicles from a company fleet? We purchase decommissioned fleet vehicles — work trucks, vans and the forklifts that ran alongside them — from businesses, utilities, municipalities and demolition contractors. Pickups, service and utility trucks, flatbeds, dump trucks, cargo vans, passenger vans and step vans, bought in any condition: running or not, high-mileage, damaged or simply aged out of service. One vehicle or an entire fleet — purchased as-is, where it sits, with pickup and hauling handled by our crew.

Row of decommissioned white Ford Super Duty work trucks with utility bodies parked in a fleet lot
Work trucks
Row of decommissioned white Ford F-150 work trucks lined up in front of a warehouse
Fleet pickups
Rough-terrain forklift loaded on a flatbed rollback truck for haul-away, with a telehandler behind it
Fleet forklifts

We purchased your decommissioned fleet vehicles

Yale forklifts lined up in an outdoor equipment yard
Forklifts staged in the yard
Row of Yale electric pallet jacks stored inside a warehouse
Pallet jacks lined up indoors
Yale stand-up forklifts parked inside a warehouse
Stand-up forklifts stored indoors
Forklifts lined up at the dock
Loaded and chained on the flatbed

Have a forklift, a fleet vehicle or an equipment lot to sell?

Call about your equipment Send project details Toll-free: 1 (877) 722-6048
Tell us about your site Send the project details and up to six photos — we will price what is sitting there.

Loaded. Hauled. Gone.

When a plant sells, the iron has to move. Our crew loads full flatbeds and 18-wheelers — motors, forklifts, cable reels, and heavy equipment — strapped, chained, and hauled out on schedule, anywhere in the country.

A full load of motors strapped down and rolling out
Flatbed trailer loaded with strapped electric motors and crated equipment inside a plant maintenance shop
Loaded inside the maintenance shop — motors and crated equipment, strapped for the road
Flatbed trailer loaded two high with strapped cable reels
Cable reels stacked two high and strapped
Rough-terrain forklift being loaded onto a flatbed truck for haul-out
Rough-terrain forklift loaded for haul-out

Have equipment that needs to move? Tell us what you have →

03 / THE PROCESS

From first look to cleared site

STEP 01

Tell us what you have

Call or text with the site location, material types, timeline and any available photos.

STEP 02

Review the project

We assess the recoverable machinery, metal streams, site access and project schedule together.

STEP 03

Mobilize & remove

We schedule our trucks and trailers, coordinate rigging as needed and move quickly so equipment clears the site without disrupting the demolition timeline.

Have something like this? Tell us what you have

Get a Quote
04 / SURPLUS FOR SALE

Surplus ready to work again

Fisher globe control valve with actuator available for sale
LOT OF 8Bench-tested

Fisher control valves with actuators

EZ and ED globe valves, 1 in. to 4 in., with 667 pneumatic actuators. Cleaned, bench-checked and stroking through full travel.

Rosemount 3051 pressure transmitters available for sale
LOT OF 24Calibrated

Rosemount 3051 pressure transmitters

3051 gauge and differential pressure transmitters with HART output, plus 644 temperature transmitters. Loop-checked and calibrated before listing.

Shell-and-tube heat exchanger available for sale
1 UNITAs removed

Shell-and-tube heat exchanger

Large horizontal process exchanger with stainless tube bundle, pulled intact during decommissioning. Nameplate data and more photos on request.

Inside a decommissioned mill

This is where the surplus comes from — a walkthrough of a paper mill being cleared, showing the machinery, motors and materials we recover and resell. See something your operation needs? Call and we will watch incoming projects for it.

Call about current inventory
Electrical switchgear bank available for sale
COMPLETE BANKAs removed

Electrical switchgear bank

Multi-section outdoor switchgear with breakers, bus and controls intact. Removed as a complete assembly — ideal for parts or re-use.

Steel process pressure vessels available for sale
2 UNITSAs removed

Steel process vessels

Two vertical steel pressure vessels with fittings and platforms, drained and opened for inspection. Sold as a pair or individually.

Trailer load of industrial cable reels available for sale
BY THE LOTOn reels

Industrial cable on reels

Recovered copper feeder and control cable, still on reels and ready to load. Buy a single reel or take the whole trailer load.

Inventory changes as new sites come down. Call (346) 526-1405 or toll-free 1 (877) 722-6048 for current availability and photos of items in stock, or tell us what you are hunting for and we will watch incoming projects for it.

Have something like this? Tell us what you have

Get a Quote
05 / SERVICES & SERVICE AREAS

One buyer for the whole site

Every category we buy has its own page — what we purchase, how the sale works and the questions sellers ask most. Start with the page that matches what is sitting on your site, or call (346) 526-1405 and describe it to us.

Buying services

Industries we serve

Have something like this? Tell us what you have

Get a Quote

Texas service areas

Gulf Coast & Southeast service areas

Plains, Mountain West & South Texas service areas

Buyer guides

NEWS / PRESS RELEASES

Announcements from the field

Company announcements from Surplus Buyers & Demo — new buying programs, services and partnerships, published in full, with the states and cities each one covers.

Press releases as PDFs — download or send

Every release above as a print-ready PDF — the same gray-and-yellow documents we send out. Download the one that fits, email it to a plant manager, a demolition partner or your own files, or take all four in the complete set. Each PDF carries the full 400+ city coverage directory.

  • Nationwide buying program launches

    Press release 1 of 4 · PDF · 4 pages · 953 KB

    Email it
  • Now buying electrical equipment, motors & valves

    Press release 2 of 4 · PDF · 4 pages · 221 KB

    Email it
  • Text-a-project quote service

    Press release 3 of 4 · PDF · 3 pages · 222 KB

    Email it
  • Demolition company partnerships

    Press release 4 of 4 · PDF · 3 pages · 184 KB

    Email it
  • All four releases — the complete set

    Every release in one file · PDF · 7 pages · 943 KB

    Email it
06 / OUR TEAM

The people behind the purchase

One crew from the first phone call to the last load out — buying, site work, listings, hauling and sales all run through people you can reach directly, not a call center.

01

Angelo Peres

Co-Owner & Operations Director — Lead Purchase Agent & Demolition Site Manager

Leads every purchase decision and runs the work on site: evaluating equipment and recoverable material, pricing offers, and managing demolition-site recovery so removal stays sequenced with the teardown schedule.

02

Sonny Mitchell

Listing Agent — Logistics & Sales

Runs the listings and the sales side: marketing purchased inventory, coordinating freight, trucking and haul-out, and working directly with buyers and sellers from first inquiry to final pickup.

03

Jake

Field Operations Supervisor

Leads the field crews on removal and load-out days — rigging coordination, equipment staging and making sure sites are left clear and on schedule.

04

Donny

Senior Equipment Appraiser

Values incoming equipment and surplus lots from photos and walk-throughs — motors, electrical gear, machinery and fleet — so sellers get a straight, defensible price.

05

Nick

Transportation & Hauling Coordinator

Keeps the trucks and trailers moving: scheduling pickups, permits and routes for oversized and multi-load haul-outs across the country.

06

Leo

Metals Recovery Specialist

Sorts and grades recovered material on site — copper, cable, stainless, alloys and carbide — so every load is priced for what is actually in it.

Buying questions go to Angelo; selling or hauling questions go to Sonny — or call the office at (346) 526-1405 and we will put you with the right person.

Nationwide project intake

Tell Us What You Have — Get a Cash Offer

Takes about a minute.

Share the project location, demolition timeline and recoverable material. Your details are emailed straight to us, with the source and campaign attached to the inquiry.

Site photos 0 of 6 photos added

Add up to six photos of the site, machinery or material — they are attached to the email we receive with your inquiry. JPG or PNG, up to 10 MB each.

Inquiry source: Website — direct

Submitting emails your project details and any photos you added to Surplus Buyers & Demo at [email protected]. Prefer to talk? Call toll-free 1 (877) 722-6048 or call or text (346) 733-1238.

07 / CONTACT US

Contact us

Have a site, surplus fleet or equipment lot to clear?

Selling Your Equipment?
Start With the Seller’s Guides

Plain-English guides written for sellers: what your gear is worth, what buyers look for, and how a sale works from first photo to payment on pickup.

How to Sell Your Used Electric MotorsWhat Is a Used Industrial Motor Worth?How to Sell Used SwitchgearWhat Is a Used Transformer Worth?How to Sell Used Circuit BreakersHow to Sell a Motor Control Center
See All 18 Seller’s Guides →
MORE FROM THE SELLER’S GUIDES
How to Sell a Used Generator  ·  Selling a Chiller: What Buyers Pay  ·  How to Sell Used Wire & Cable  ·  What Is Copper Bus Bar Worth?  ·  How to Read a Transformer Nameplate  ·  Plant Closing? Equipment Worth Before Auction  ·  Data Center Decommissioning Gear  ·  Obsolete Switchgear & Parts Value  ·  Copper Bus vs Aluminum Bus  ·  How Equipment Value Lowers a Demolition Bill  ·  What Is a Used Industrial Motor Worth?  ·  What Happens to Equipment After a Plant Closes