How to Sell a Used Generator
A used generator sits at the top of the surplus market for one simple reason: the buyer on the other end usually needs it badly. A facility that has lost backup power — or is building it — is not shopping for decoration. That urgency is what you are selling, and it is why a generator should almost never be priced by the pound. But generator value is not automatic. It is built from the nameplate, the hours, the brand, and the condition, and sellers who understand those factors get real equipment offers. Sellers who do not often watch a working generator leave on a scrap ticket. This guide explains how buyers price a used generator and how to sell yours the right way.
Start With the Nameplate: kW, Voltage, Phase
Every generator offer begins on the data plate. Photograph it first. The details that set the value are:
- Size in kW (and kVA) — standby generators run from small commercial units up through large industrial sets measured in megawatts. Size decides which buyers are even in the conversation.
- Voltage and phase — single-phase sets serve smaller buildings; three-phase sets at common industrial voltages (480V and 208V are the everyday ones) fit the widest market. Reconnectable alternators that can be set to more than one voltage widen the buyer pool further.
- Fuel — diesel sets dominate the industrial standby market. Natural gas and propane sets serve their own buyers. The fuel is part of the fit, and fit is part of the price.
- Engine and alternator brands — Caterpillar, Cummins / Onan, Kohler, Generac, Detroit, and MTU engines, driving alternators from the same major builders, carry the deepest resale demand because service networks and parts are everywhere.
Hours: The Number Every Buyer Asks Second
After size, hours drive the conversation. A standby generator lives an unusual life — it may be old in years and young in hours, because it only ran during outages and exercise cycles. Low-hour standby sets are the strongest used generators there are. Photograph the hour meter on the control panel, and photograph the panel itself: the controller brand and model (Deep Sea, Woodward, and the manufacturers' own panels are common) tell a buyer how the set was monitored and maintained. If the set has an exercise and maintenance history — service stickers on the enclosure, a logbook in the transfer switch — mention it. Documented care is worth money on a machine whose whole job is to start on the worst day of the year.
Condition: What Buyers Look For
Buyers discount for the things that make a set a gamble: a motor that will not crank or has not run in years, coolant or oil leaks, a damaged radiator, rodent damage in the alternator and wiring, a cracked or rusted enclosure, and a missing or dead control panel. A set that was in service and exercised regularly, removed during an upgrade, is worth far more than the identical set that sat dead behind a building. If the generator still starts and runs, say so — and if it does not, say that too. A non-running set still has value in its engine, alternator, and parts, but it will be priced as a project, and surprises at pickup only get the offer renegotiated.
The Package Around the Generator
A generator rarely sells alone in a buyer's mind. The automatic transfer switch (ATS) that pairs with it, the sub-base fuel tank under it, the enclosure, the battery charger, the exhaust and radiator components — a complete, matched package is worth more than the bare set, because the next owner can install it as a system. If the transfer switch is being removed too, photograph its nameplate as well. And if the generator is part of a larger electrical cleanout — switchgear, transformers, a full backup-power room — price it together. One buyer taking the whole power train is worth more than five buyers taking pieces.
Standby, Prime, and Portable: Three Different Markets
Not every generator lives the same life, and the rating on the plate tells a buyer which market yours belongs to. Standby-rated sets — the hospital, data center, and plant backup machines — are the volume of the used market: valued on low hours and documented exercise. Prime and continuous-rated sets worked for a living, often in oilfield, rental, or remote power service; their hours run high, and they price on engine condition and rebuild history instead — a prime set with a documented overhaul is a different machine from one without the paperwork. Portable and towable sets on trailers serve the rental and construction world and price on road-readiness as much as power: tires, lights, and a title for the trailer join the nameplate in the conversation. Whichever kind you have, name it correctly in the first message. A buyer pricing the wrong category gives you the wrong number, and the correction never seems to travel in the seller's favor.
How to Sell It: The Process
Step 1 — Photograph it. The data plate, the hour meter and control panel, all four sides of the set, the transfer switch nameplate, and the engine tag if it is separate. Photos where the set sits are fine — it does not need to be disconnected first.
Step 2 — Note what you know: running or not, when it last ran under load if you know, and how it can be loaded — pad access, crane or forklift reach, gate width.
Step 3 — Get a written offer priced as equipment, in writing, so you can compare it against any scrap or trade-in number side by side.
Step 4 — Pickup is arranged. Disconnection, rigging, and hauling are coordinated with your schedule, and you are paid on pickup with a documented bill of sale.
Mistakes That Cost Sellers Money
- Letting a removed set sit outdoors uncovered. Water in the alternator and controls turns a running set into a project. If a set comes out, sell it while it is still the machine that was in service.
- Selling the transfer switch separately first. The matched ATS is part of the package's value. Splitting it away lowers what the set itself brings.
- Scrapping a low-hour set for weight. A standby generator's value is in its hours and readiness, not its steel. Scrap pricing ignores both.
- Cutting cables and conduit at the lugs. Leave connections intact where you can; a set that was cut loose in a hurry reads as a set that was treated roughly everywhere else too.
Surplus Buyers & Demo is based in Houston and buys generators nationwide — single standby sets, matched generator and transfer switch packages, and complete backup-power rooms on closures and decommissioning projects. Send photos of the data plate and the set and we will put a written number on it.
Frequently Asked Questions
Do you buy generators that are not running?
Yes. A non-running set is priced as a project — engine, alternator, and parts value — rather than as a ready standby unit. Send photos and tell us what you know about its condition.
Does the generator need to be disconnected before you can make an offer?
No. We price sets in place from nameplate and condition photos, and disconnection and rigging are arranged as part of pickup.
What information matters most for a fast offer?
A clear photo of the data plate (kW, voltage, model, serial), the hour meter reading, and photos of the set and transfer switch. Those cover what a buyer prices first.
Should I sell the transfer switch with the generator?
Usually yes. A matched generator and ATS package is worth more together than the two bring apart, because the next owner installs them as one system.
Do you buy just one generator, or only large lots?
Both. A single standby set justifies a call, and we also buy complete backup-power rooms — generators, switchgear, and transfer switches — as one lot.
How am I paid?
Payment on pickup, with a documented bill of sale. Larger projects can be set on agreed written terms before removal starts.
Send photos of the nameplate and the gear — call or text (346) 733-1238 for a written offer.
Office: (346) 526-1405 · Toll-free: 1 (877) 722-6048
Tell Us What You Have →

