We Buy Used Switchgear
Surplus Buyers & Demo buys used switchgear from plants, hospitals, data centers, warehouses, and commercial buildings across the country. If your facility is upgrading its service, closing a line, or clearing an electrical room, the gear you are looking at is worth pricing as equipment before anyone prices it as metal — because a working lineup, its breakers, and its bus are worth more installed in the next facility than they will ever be worth in a scrap bin. We are based in Houston, Texas and buy nationwide: complete lineups, single sections, and loose breakers, in service, de-energized, or already on the floor.
What We Buy
- Low-voltage switchgear and switchboards — 480V-class lineups and distribution switchboards, main-tie-main and main-lug configurations, in common bus ratings.
- Medium-voltage switchgear — 5kV and 15kV class metal-clad and metal-enclosed lineups, including vacuum and legacy air-magnetic sections.
- Power circuit breakers — draw-out air circuit breakers, sold with the lineup or loose: Square D Masterpact, Eaton / Cutler-Hammer Magnum, Siemens WL, GE EntelliGuard and legacy AK / AKR frames, Westinghouse DS.
- Insulated-case and molded-case mains and feeders in larger frames.
- Brands we buy: Square D (Schneider), Eaton / Cutler-Hammer, Siemens, ABB, GE, Westinghouse, ITE, Federal Pacific (evaluated case by case), and Allen-Bradley on the control side.
- Conditions: in service, de-energized in place, as-removed, untested, new surplus, and complete electrical-room cleanouts.
What Sets the Price
- Manufacturer and model line. Current and widely installed lines have the deepest resale demand; discontinued lines often carry strong parts value because the facilities still running them cannot buy replacements new.
- Voltage class and bus rating. Standard classes and ampacities that fit common facilities price better than one-off configurations.
- Bus material. Copper bus is one of the biggest value swings in any lineup — it carries more resale value and more material value than aluminum bus. If your nameplate lists the bus material, that detail alone sharpens an offer.
- The breakers in it. The main and feeder breakers are frequently the most valuable components in the lineup. A complete lineup with its breakers in place prices better than the same lineup picked over.
- Condition and completeness. Clean indoor gear with doors, covers, and hardware intact prices at the top. Rust, water intrusion, heat or arc damage, and missing pieces each take something off — they change the number, not whether there is one.
- Quantity and access. A full lineup, or a whole electrical room priced as one lot, spreads one pickup across more equipment than a single section does.
What to Photograph
Good photos are what turn a guess into a firm written offer. Send:
- A wide shot of the full lineup, end to end, so sections can be counted.
- A close-up of the lineup nameplate — manufacturer, model, voltage, bus rating, serial number.
- Close-ups of the main and feeder breaker labels and trip units.
- A shot of the bus through any open section, if the lineup is safely de-energized — copper color versus silver-gray settles the bus question.
- Any damage, rust, or missing doors, shown honestly. Hidden problems surface at pickup; disclosed ones are already in the price.
How Selling It Works
Step 1 — Send photos of the nameplate and the gear, where it sits. Call or text (346) 733-1238, or use the quote form and tell us what you have. The gear does not need to be removed first.
Step 2 — Get a written offer for the lineup priced as equipment, so you can compare it against any scrap quote side by side.
Step 3 — Pickup is arranged around your schedule. For gear still installed, removal is coordinated with your shutdown — de-energized, locked out, and rigged out.
Step 4 — Payment on pickup, with a documented bill of sale. Nothing leaves on a promise.
Lineups, Sections, and Loose Breakers
Most sellers have one of three situations, and we buy all three. A complete lineup is a working system the next facility can install — it earns the strongest price, so price it whole before anything is pulled out of it. A single section or switchboard — a spare segment, or what is left after a partial upgrade — usually sells on the strength of its breakers, bus, and parts, and still deserves an equipment offer. Loose breakers that are already out price by their labels: brand, series, frame, and trip unit. If you are holding a mix — a lineup plus storeroom spares — send photos of all of it. One combined lot, one pickup, one payment is how most sellers come out ahead.
Not Sure Whether It Is Switchgear or a Switchboard?
Sellers mix the terms up constantly, and it does not matter. Switchgear is the heavier, draw-out-breaker construction; switchboards are the lighter distribution construction — but both sell, both are priced off the same nameplate details, and the distinction takes a buyer about ten seconds once he sees the photos. The same goes for lineups you can only describe as "the big gray electrical cabinets." Photograph the nameplate and the breakers, send them over, and we will tell you what you have, which market it sells into, and what it is worth. Not knowing the vocabulary costs you nothing. Not getting the gear priced at all is the expensive mistake.
One caution that saves sellers real money: price the gear before demolition starts and before anyone strips the main breaker or the bus for quick scrap. A lineup photographed in place is an asset; the same lineup knocked loose and rained on is a discount. Send the photos first — that is where every honest number begins.
Frequently Asked Questions
Do you buy switchgear that is still installed?
Yes. We price gear in place from nameplate and lineup photos, and pickup is coordinated with your shutdown schedule. The equipment is de-energized and locked out before removal begins.
What if part of my lineup is damaged or missing breakers?
We still buy it. Completeness is priced section by section, so photograph the lineup exactly as it stands and the offer will reflect what is actually there.
Is my old lineup too obsolete to sell?
Usually not. Facilities running discontinued GE, Westinghouse, ITE, and other legacy lines buy used sections and breakers because new replacements no longer exist. Age changes the buyer, not whether there is value.
Can I sell just the breakers out of my switchgear?
You can, and we buy loose breakers — but price the complete lineup first. A lineup with its breakers in place is normally worth more to one buyer than the breakers and the shell sold apart.
Do you buy medium-voltage gear, or only 480V?
Both. We buy low-voltage switchboards and switchgear as well as 5kV and 15kV class medium-voltage lineups. The nameplate photo tells us the class and rating.
How am I paid?
Payment on pickup, with a documented bill of sale. Larger projects can be set on agreed written terms before removal starts.
Send photos of the nameplate and the gear — call or text (346) 733-1238 for a written offer.
Office: (346) 526-1405 · Toll-free: 1 (877) 722-6048
Tell Us What You Have →

