We Buy Used Industrial Motors
Surplus Buyers & Demo buys used industrial motors from plants, mills, water facilities, and warehouses nationwide — running take-outs, shelf spares, matched sets, and full motor-room cleanouts. Motors are where sellers most often misjudge what they have in both directions: small motors hauled around chasing equipment money they will never bring, and large premium motors sold by the pound for a fraction of their working value. The difference is readable on the nameplate, and we price from it, in writing. Based in Houston, Texas, we buy motors still mounted and wired, on pallets, or on the shelf.
What We Buy
- AC induction motors — from fractional horsepower through large integral-horsepower units, standard T-frame and older U-frame motors.
- Enclosures: TEFC (totally enclosed fan cooled), ODP (open drip-proof), explosion-proof, severe-duty, and washdown motors.
- Efficiency classes: NEMA Premium and inverter-duty / inverter-rated motors, as well as older standard-efficiency units.
- Specialty motors: DC motors, gear motors, brake motors, wound-rotor motors, and vertical hollow-shaft pump motors.
- Brands we buy: Baldor-Reliance (ABB), WEG, Toshiba, Marathon, Leeson, Siemens, US Motors (Nidec), and GE.
- Conditions: running take-outs, never-installed spares, untested, and failed motors — failed units are priced honestly on core and material value.
What Sets the Price
- Horsepower — the biggest lever. Small motors are commodities that price near their material content. As horsepower climbs, replacement cost and sourcing urgency climb with it, and the gap between equipment value and scrap value widens. The bigger the motor, the more it pays to get an equipment offer first.
- Voltage. 460V is the industrial standard with the deepest market; dual-voltage 230/460V motors fit more buyers. Odd voltages and 575V units serve narrower markets.
- Frame and speed. The nameplate frame tells a buyer the motor's physical class; standard speeds — 3600, 1800, 1200 RPM — move fastest, and unusual speeds have fewer homes.
- Enclosure and efficiency. TEFC motors fit more environments than ODP and generally hold value better. NEMA Premium and inverter-duty ratings are what plants are buying now, and they hold used value accordingly.
- Brand. Installed base drives demand — the big names above have the deepest spare-parts and replacement markets.
- Condition and history. A motor removed while running is the strongest used motor there is. Burned windings mean a rewind bill for the next owner, so failed motors price on core and material. Small details matter: a shaft that turns freely, an intact conduit box, and full-length leads all protect value; cut leads and broken feet shave it.
- Quantity and matching. Several identical motors — especially identical shelf spares — are worth more per unit than scattered singles, because one facility can take the set.
What to Photograph
- The nameplate of each distinct motor — horsepower, frame, voltage, RPM, enclosure, manufacturer, model. Legibility is everything; wipe dust off the plate before you shoot it.
- One wide shot of the whole group, with counts of identical motors.
- The conduit box and leads, and the shaft end — a note on whether the shaft turns freely by hand.
- Any damage: broken feet, cracked fan covers, bent shafts, shown as they are.
- Motors still mounted on pumps, fans, or compressors — photograph them in place and mention the driven equipment, which sometimes prices better together.
How Selling Them Works
Step 1 — Send nameplate photos and counts. Call or text (346) 733-1238, or use the quote form. Note what you know of the history: running take-out, shelf spare, or failed.
Step 2 — Get a written offer. We sort the lot honestly — equipment money for the motors that earn it, fair material value for the ones that do not — in one number.
Step 3 — Pickup is arranged. Motors do not need to be removed first; on larger lots, disconnection, rigging, and loading are arranged as part of the pickup. Leave leads full length — do not cut cables to tidy up.
Step 4 — Payment on pickup, with a documented bill of sale.
Singles, Matched Sets, and Motor-Room Cleanouts
A single large or specialty motor justifies a call on its own. A matched set justifies a better one: plants standardize on one motor across a line, and their spare has to be that exact motor — same horsepower, frame, and speed — which makes your identical spares worth more together than apart. A full motor room or storeroom cleanout prices as one lot: photograph each distinct nameplate, count the duplicates, take one wide shot of the room, and the whole thing gets one written offer and one pickup. Before any motor goes to scrap, check the odd ones — DC, gear, brake, explosion-proof, and vertical pump motors serve narrower but motivated markets, and the nameplate you do not recognize is exactly the one worth photographing.
If the Nameplate Is Missing
It happens — plates corrode, get painted over, or come off in a washdown environment. A motor without a nameplate is harder to price, not impossible. Photograph the motor from both ends and the side, note the mounting (foot, flange, or C-face) and the shaft size if you can measure it, and include something in the frame for scale. Tell us what it drove, if you know — a motor that ran a specific pump or fan for years carries context a buyer can work with. Expect the offer to price in the uncertainty, because the next buyer faces the same missing plate. It is one more reason to photograph the plates on every motor you own while they are still legible.
Send the nameplate photos and we will tell you which of your motors are worth equipment money, which are worth material money, and why — in writing, before anything moves.
Frequently Asked Questions
Is a burned-out motor worth anything?
Usually, yes. A large failed motor carries core and material value even though it no longer runs. It will not be priced as a working motor, but it should beat light scrap. Send the nameplate.
Does the motor need to be removed or disconnected first?
No. We price motors mounted, wired, palletized, or on the shelf from nameplate photos. On larger lots, disconnection and rigging are arranged as part of pickup.
My motors are only a few horsepower each. Worth calling?
Small motors price close to material value, but in quantity they add up — and combined with other electrical surplus in one lot, they contribute to a better overall number. Send a group photo and a count.
Why do identical spare motors bring more?
Because a plant running that exact motor needs that exact spare. A matched set can be placed with one facility, while scattered singles each need their own buyer — so sets earn more per motor.
Should I cut the cables and leads off before pickup?
No. Full-length leads and an intact conduit box protect a motor's value, and cut leads shave the price. Leave everything as it is; removal is handled at pickup.
How am I paid?
Payment on pickup, with a documented bill of sale. Larger projects can be set on agreed written terms before pickup.
Send photos of the nameplate and the gear — call or text (346) 733-1238 for a written offer.
Office: (346) 526-1405 · Toll-free: 1 (877) 722-6048
Tell Us What You Have →

